There's probably nothing worse than a torn car seat. But it happens. And when it does you may be at a lose as to how to fix it. You could take it and have a pro fix the tear or hole, but it will cost you. There are some fix kits on the store to help fix cloth, leather and vinyl car seats, which will cost you minimum. Depending on the size of the repair, the results may be good or bad. These kits ordinarily work better on small tears or holes and may be hard to match on colors other than black and white.
Repairing Torn Leather Seats
Maintenance Hand Kit
You may have paid the extra cash for those leather seats. They look great and there's no need to vacuum or clean them but when they get torn then you have a problem. One clarification is to buy a leather fix kit to fix the seat. Here are the typical instructions for using one:
o Buy a accepted leather fix kit.
o Scuff the damaged area lightly with the sandpaper provided.
o Clean the area with the alcohol swab that is also provided.
o Secure cuts or holes with a subpatch and adhesive that are provided in the kit. Fill in larger holes first with a piece of scrap leather that is also provided and fasten it in place with adhesive. With upholstery, it may be primary to isolate the tear slightly and slip the leather scrap or a subpatch into place inside the tear.
o Mix the color combination to match the color of the item you want to repair. Consequent the color-matching guide that is provided in the kit. Spread the combination over the area and allow it to dry.
Another selection for repairing torn leather seats is to sew them yourself. For instance, if the seat is ripped at a seam, you might be able to remove the cover from the seat and fix the seam. You'll need a heavy-duty sewing machine with large needle and heavy thread. Or hand stitching the seam can be done, but it is a challenge since pushing a needle straight through genuine leather is difficult. This task requires removing the cover from the seat often requires the dismissal of the seat itself, from the vehicle. After getting the seat out, you'll have to disassemble it, separating the seat from the back.
Repairing Torn Vinyl Seats
There are also fix kits for torn vinyl car seats or you can buy what you need and make the repairs. Here are is what you need to fix vinyl seats:
o Vinyl patch piece
o Vinyl adhesive
o Vinyl color (if you don't have the right color patch piece)
Steps to Repairing:
o Cut nearby the hole to make it even. This will make it easier to put your patch in.
o Find a piece of vinyl that matches in color and is big adequate to over fill the spot where the hole is so that no gap will appear later in your repair.
o Tuck the patch piece of vinyl into the hole slowly so you do not rip it and make it bigger. Level the patch out so it is spread out evenly.
o Lift the damaged vinyl section up and apply the vinyl adhesive to the primary vinyl upholstery. Put the adhesive on the patch piece to get the adhesion.
o Press the two vinyl pieces together carefully. If you press too hard a gap could appear from the pieces sliding apart.
o Allow upholstery to dry for 24 hours and keep out of direct sunlight or extreme heat.
Repairing Torn Fabric Seats
There are kits available to fix rips, burns and holes in fabric upholstery seats. Here are the steps to repair:
o Kit comes with 7 fabric fiber colors, fabric adhesive, spatula, mixing bottle, screen applicator, color mix chart and complete instructions.
o Fill the damaged spot with clear adhesive.
o Apply color fibers to applicator, lay over adhesive and move slowly to disperse color fabric fibers.
o Let fix dry then spray with bonding adhesive.
Repairing That Torn Car upholsteryRelated : video games Store